Resetting The P-Touch Labelling Machine; Resetting All Settings To The Factory Settings Using The Machine Buttons - Brother D800W User Manual

21

Resetting the P-touch Labelling Machine

You can reset the internal memory of your machine to clear all saved label files, or if the machine is not
operating correctly.
Resetting All Settings to the Factory Settings Using the
Machine Buttons
All text, format settings, option settings and stored label files are cleared when you reset the machine
(including language and unit settings).
To reset the machine, perform the following procedure.
a
Turn the machine off.
b
Press and hold the
(Power) indicator lights in orange and the
c
While holding the
 Press two times to reset the customised settings and clear the data except all of the transferred data
from the computer, registered programs, and the contents in the file memory. (The settings that you
can make using the keyboard LCD unit are reset.)
 Press four times to clear all of the transferred data from the computer, registered programs, and the
contents in the file memory.
 Press six times to delete all data and reset the machine settings to the factory settings except the
Wi-Fi settings.
d
Release the (Power) button.
(Power) button and the
(Power) button, press the
(Feed and Cut) button for about three seconds until the
(Label) indicator blinks in green.
(Feed and Cut) button as follows:
21
21
21
181