Table of Contents
Advertisement
Printing a Label Using the P-touch Labelling Machine Keyboard
Printing a Label
Feeding Tape
Important
• Be sure to feed tape to remove any slack in the tape and ink ribbon after inserting the tape cassette.
• Do not pull the label when the machine is ejecting it from the tape exit slot. Doing so will cause the
ink ribbon to be discharged with the tape. The tape may no longer be functional after the ink ribbon
discharges.
• Do not block the tape exit slot during printing or when feeding tape. Doing so will cause the tape to jam.
Feed and Cut
The Feed and Cut function feeds approximately 22.3 mm of blank tape, and then cuts the tape.
a
Press the
(Feed and Cut) button.
[Feed & Cut?] appears on the LCD.
b
Select [Feed & Cut] using the
Tape... Please Wait] appears while the tape is fed, and then the tape is cut.
Note
To exit or cancel this function press the Esc key.
Feed Only
This function ejects the tape approximately 22.3 mm, resulting in a blank label sticking out of the tape
cassette. This action is recommended when using Fabric tapes, which should be cut with scissors.
a
Press the
(Feed and Cut) button.
[Feed & Cut?] appears on the LCD.
b
Select [Feed Only] using the
Tape... Please Wait] appears while the tape is fed.
Note
To exit or cancel this function press the Esc key.
Tape Cutting Options
The tape cutting options allow you to specify how the tape is fed and cut when printing labels.
a
Select [Settings] in the Home screen using the
key.
or
key, and then press the OK or Enter key. The message [Feeding
or
key, and then press the OK or Enter key. The message [Feeding
,
,
or
key, and then press the OK or Enter
2
2
2
2
2
2
40
Advertisement
Table of Contents
