Table of Contents
Advertisement
How to Use P-touch Transfer Manager
e
To change the key number assigned to an item, right-click the item, select [Key Assign], and then select
the key number you want.
Note
• Except for the data in databases, all data transferred to the machine is assigned a key number.
• If the template or other data transferred to the machine has the same key number as another template
already saved in the machine, the new template will overwrite the old one. You can confirm the templates
key number assignments saved in the machine by backing up the templates or other data (see Backing
up Templates or Other Data Saved in the Machine on page 142).
• If the machine memory is full, remove one or more templates from the machine memory (see Backing up
Templates or Other Data Saved in the Machine on page 142).
f
To change the names of templates or other data that you want to transfer, click the item you want, and
then type the new name. The number of characters used for the template names may be limited
depending on your model.
11
140
Advertisement
Table of Contents
