Brother D800W User Manual page 104

Changing the P-touch Labelling Machine Settings
Communication Modes and Authentication Methods/Encryption Modes
When [Communication Mode] is set to [Ad-hoc]

Authentication Method
Open System
 When [Communication Mode] is set to [Infrastructure]
Authentication Method
Open System
Shared Key
WPA/WPA2-PSK
LEAP
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-CHAPv2
EAP-TTLS/PAP
EAP-TLS
Important
To specify higher level security settings:
When performing certificate verification with EAP-FAST, PEAP, EAP-TTLS or EAP-TLS authentication
methods, the certificate cannot be specified from the "Printer Setting Tool". After the machine is
configured to connect to the network, specify the certificate by accessing the machine from a web browser.
For more information on using a web browser, see Web Based Management on page 178.
Encryption Mode
None / WEP
Encryption Mode
None / WEP
WEP
TKIP+AES / AES
CKIP
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
6
6
93