Table of Contents
Advertisement
Changing Your P-touch Labelling Machine Network Settings
c
Double-click the unconfigured device.
Note
If you do not use a DHCP/BOOTP/RARP server, the device appears as [Unconfigured] in the BRAdmin
Light utility screen.
d
Select [STATIC] for [Boot Method]. Type the [IP Address], [Subnet Mask], and [Gateway] settings (if
needed) for your print server.
e
Click [OK].
f
If you have set the IP address up correctly, the Brother print server appears in the device list.
19
176
Advertisement
Table of Contents
