How to set the unit
3.2 Main functions
16
To select any of the given functions, press the 'MENU' button up to when the required one is
showing up on the display. Select the function by the 'ENTER' button and the display will blink.
Use the 'DOWN' and 'UP' button to change the mode. Once the required mode has been
selected, press the 'ENTER' button to store. To return to the main functions without any
change, press the 'MENU' button or wait for one minute.
Hold the 'MENU' button to quit the menu mode. The unit will run the built-in program you
selected.
The main functions are shown below:
moving head