JLG 3507 Operator's Manual page 38

Section 2 - Pre-Operation and Controls
Boom Angle, Auxiliary Hydraulic & Message Window (Section 5)
a. Boom Angle Indicator
Displays the boom angle in degrees.
(0 degrees indicates horizontal)
b. Auxiliary Hydraulics
When the permanent auxiliary hydraulic function is active, the display
shows the percentage value (-100% to +100%) of the auxiliary hydraulic for
30 seconds. Also displays for 30 seconds at each change. See Section
4 - Attachments and Hitch Options for details.
c. Message Window
Code Entry - Anti Theft Device: Driver must enter four-digit code after
system start. See page 2-15 for details.
Hardware-exchange: After a hardware exchange has occurred, the
hardware-display will appear for 30 seconds. Pressing the OK button within
those 30 seconds will access the hardware exchange menu.
Service: Service messages will be displayed after start-up for 30 seconds
when a given service time interval elapses. Pressing the OK button within
those 30 seconds will allow the driver to verify if the service has been
completed.
User Interface - Level 1
To access the menu hold the OK key down for 2 seconds.
• Language
• Anti Theft Device
• Operating Modes
• Diagnostics
• Fault Memory
• Service Display
• Vehicle Data
Note: Access authorization (a numeric code) is required to view Levels 2 and 3.
2-14
OZ0330
3121851