JLG 3507 Operator's Manual page 27

4. Front Axle - Steer cylinders undamaged, not leaking; pivot pins secure;
hydraulic hoses undamaged, not leaking.
5. Wheel/Tire Assembly - No loose or missing lug nuts; proper inflation.
6. Cab & Electrical -
• General appearance; no visible damage; proper load charts and applicable
Operator & Safety manual located in cab.
• Window glass undamaged and clean.
• Gauges, switches, joystick, foot controls, park brake & horn operational.
• Check seat belt for damage, replace belt if frayed or cut webbing, damaged
buckles or loose mounting hardware.
• Check brake fluid level, refill as required.
7. Hydraulic Reservoir - Recommended fluid level on sight gauge (lubricant must
be cool); filler/breather cap secure and working.
8. Wheel/Tire Assembly - No loose or missing lug nuts; proper inflation.
9. Rear Axle - Steer cylinders undamaged, not leaking; pivot pins secure;
hydraulic hoses undamaged, not leaking.
10. Rear Work Lights- Clean, undamaged and work properly.
11. Fuel Tank - Check fluid level, refill as required; filler cap is securely fastened.
12. Wheel/Tire Assembly - No loose or missing lug nuts; proper inflation.
13. Engine Compartment -
• Engine Crankcase and Radiator, check levels & refill as required.
• Drive belts, check condition & replace as required.
• Air cleaner element condition indicator, check for clogged condition. Replace
element as required.
• Check and clean pre-cleaner as required.
• Main control valve, see inspection note.
• Battery cables tight, no visible damage or corrosion.
• Engine cover properly secured and latched.
14. Mirrors - Clean, undamaged and work properly.
15. Wheel/Tire Assembly - No loose or missing lug nuts; proper inflation.
16. Sway Cylinder - Pins secure; hydraulic hoses undamaged, not leaking.
17. Right Outrigger (12 & 13M)- Pins secure; hydraulic hoses & cylinder
undamaged, not leaking.
18. Attachment - Properly installed, see "Attachment Installation" on page 4-7.
3121851
Section 2 - Pre-Operation and Controls
2-3