Silvercrest SBB 850 A1 Operating Instructions Manual page 77

Display
Display for
selection of the weight
(750 g, 1000 g, 1250 g)
the remaining baking time in minutes and
the programmed time
the selected level of browning (light
medium , dark
the selected program number
the programme sequence
the addition of ingredients („ADD")
Start / Stop
To start and stop an operation or to delete a
time-programming.
To interrupt the operation, briefly press the Start/Stop
button until a signal tone sounds and the time in
the display flashes. By once again pressing the
Start/Stop button within 10 minutes, the operation
can be continued. Should you forget to re-start the
programme, after 10 minutes it will be automatically
continued.
To completely terminate the operation or to delete
a programming, press the Start/Stop button
3 seconds, until long signal tone sounds.
Note:
Do not press the Start/Stop button
to simply check the condition of the bread. You can
watch the baking operation through the viewing
window.
Warning!
When pressing all buttons an acoustic signal must
be audible, unless the appliance is in operation.
,
, rapid )
for
if you want
- 73 -
Level of browning (or Rapid modus)
Select the browning level or switch into the Rapid
modus (light/medium/dark/Rapid). Press the
Browning Level button
arrow is located above the desired browning level.
For the Programmes 1 - 4 you can, through repea-
ted pressing of the Browning Level button
activate the Rapid modus to shorten the baking pro-
cess. Press the Browning Level button
repeatedly until the arrow appears over "Rapid". A
browning level cannot be selected with the
programmes 6, 7 and 11.
M L
Timer
Time-delayed baking.
Note:
Time-delayed baking cannot be arranged with
Programme 11.
Operation indicator lamp
The operation indicator lamp
glowing that a programme is currently running. If
you want to start a programme time-delayed by
using the timer function, the operation indicator
lamp first glows when the programme itself
starts, not when the timer is activated.
Bread weight
Select the bread weight (750 g / 1000 g / 1250 g).
Press the button repeatedly until the arrow appears
under the desired weight. The weight details (750 g /
1000 g / 1250 g) relate themselves to the amount
of ingredients placed in the baking mould
Note:
The default setting when switching the appliance on
is 1250 g. You cannot adjust the bread weight with
the Programmes 6, 7, 11 and 12.
repeatedly, until the
,
indicates with its
.