System Configuration - Honeywell NetAXS-123 Startup Manual

NetAXS-123 Startup Guide, Document 800-05780V2
4. Enter "admin" in the User Name field, and enter "admin" in
the Password field. Both the user name and password are
case-sensitive.
NOTE:
For additional security, it is recommended that you change
your default user name (admin) and password (admin) to a new user
name and password. Refer to Appendix A for additional details.
5. Click Login to display the NetAXS-123 Main Window, also
referred to as the "Landing Page".
©
2013 Honeywell, Inc. www.Honeywell.com

7) System Configuration

The flowchart below outlines the basic steps necessary to successfully
program your NetAXS-123 panel.
A
SET COMMUNICATIONS
SET TIME
B
C
ADD TIME ZONES
CONFIGURE DOOR(S)
D
E CREATE ACCESS LEVELS
F
ADD CARDS
Please follow the detailed steps in the next six sections to ensure the
successful programming of your NetAXS-123 panel. Start each of the
major steps on the Landing Page by selecting the link shown. Return
to the Landing Page by clicking on
These steps are for a
stand-alone gateway
Select communications
controller. For details
type (web or hosted, 485
regarding set up of
or EVL)
RS485 or EVL Loops,
please refer to
Set the clock in the panel
NetAXS-123 User
to local time
Guide.
Create time zones to be used to lock or unlock a door
by schedule as well as grant or deny access to a door
by a card holder
Create and label reader (s), input and output devices
and assign time schedules to doors
Defines which doors card holders can access and
when they can access them
Assign access levels to cards and then the card to
the card holder
.
8