Honeywell NetAXS-123 Startup Manual page 12

NetAXS-123 Startup Guide, Document 800-05780V2
D4 - Door Configuration: Door Status (if used)
NOTE:
If a door position switch is not used, SKIP THIS SECTION by
clicking on .
1
2
1. Click the Inputs tab.
2. Click the Status sub-link.
3. Enter a Name for the Input Device.
4. Select a Mode (Normally Closed or Normally Open).
5. Select Supervision type.
6. Click Submit Changes to save the changes.
©
2013 Honeywell, Inc. www.Honeywell.com
3
4
5
6
D5 - Door Configuration: Door Egress (if any)
NOTE:
If a Request To Exit (REX) device is not used, SKIP THIS
SECTION by clicking on
1
1. Click the Egress sub-link.
2. Enter a Name for the Input Device.
3. Select a Mode (Normally Closed or Normally Open).
4. Select Supervision type.
5. Click Submit Changes to save the changes.
6. Return to the Landing Page by clicking
.
2
3
4
5
.
12