Malaguti Centro 125 Service Manual page 63

125 i.e. - 160 i.e.
REAR WHEEL
• Remove beforehand:
- Muffler (page 55)
- Rear mudguard (page 57)
- Rear brake calliper (page 61)
• Position the motorcycle on the stand and place a
suitable support under the engine.
• Unscrew the lower screws (V) of the right shock
absorber. Rotate and anchor the shock absorber up
high.
D
100 ± 20%
V
2
45 ± 15%
• Unscrew the wheel nut (D).
• Unscrew the fixing screws (V") of the slider arm.
• Extract the external spacer (A).
• Remove the slider arm (B).
• Slide off the wheel pin the internal spacer (C).
• Check the wear conditions of the oil seals (E- F) and replace it if necessary.
• Check the condition of the silent-block (G).
• A appropriate puller must be used for bearing (H) replacement operations, after having removed the Seeger ring (l).
• Slide off the wheel with care, ensuring that the vehicle is stable.
V
D
F. 156
62 11/07
A F
V
2
V
2
V
2
B
A
F. 157
C
F. 158
G
H
E
I
B
C