Malaguti Centro 125 Service Manual page 59

125 i.e. - 160 i.e.
INTAKE SYSTEM
• Unhook the clamp (A).
• Disconnect the tube (C ) "IDLE" valve- filter box sleeve.
• Remove the clamps (B-F. 147).
• Disconnect the vapour recovery tube (C1-F. 147).
• Cut the ties (E).
• Disconnect the connector (F) (Inlet air temperature sensor)
• Loosen the clamps (G).
F. 146
B
C
C
1
F. 147
F
The ties that have been cut in order to remove various components must be replaced
with identical ones, and placed in the original position.
58 11/07
A
E G