Table of Contents
Advertisement
125 i.e. - 160 i.e.
REAR BRAKE CALIPER
• Place an appropriate drain pan under the brake calliper.
• Unscrew the hydraulic fitting (R).
Empty out the hydraulic circuit, pouring the fluid in a special container for disposal in accordance with specific
waste disposal laws.
• Unscrew the screws (V2) and remove the calliper.
Brake fluid is corrosive and can cause personal injury.
Remove the calliper, taking care that fluid line does not get damaged and the disc and pads do not get
dirty. When the removal and replacement operations are finished, check that there are no losses, dry up
any traces of fluid and bleed the system as indicated in page 14.
During reassembly, change the gaskets (G).
R
V
2
20 ± 10%
30 ± 20%
G
F. 155
61
11/07
V
2
F. 154
R
Hide quick links:
Advertisement
Table of Contents
