Malaguti Centro 125 Service Manual page 57

125 i.e. - 160 i.e.
EXHAUST
MANIFOLD
• D2.
• Remove the exhaust
manifold and related
gaskets.
F. 138
SHOCK
ABSORBERS
Support the central
part of the frame.
• Lower screws (Vi)
• Top screws (Vs)
• Extract the shock
absorbers.
F. 140
• Screw the O2 sensor (D) on the
exhaust connector (1).
• Position the collector (1) in
correspondence with the engine,
inserting the gasket (2) that should
be replaced if they are deteriorated.
• Screw and tighten the nuts (D2).
• Insert the gasket (3).
• Insert the muffler (4) on the manifold
exhaust.
• Screw and tighten the screws (V3),
after having inserted the washers
D D
2
(R ).
• Tighten the clamps (F).
V
S
V
i
F. 141
REMOUNTING THE
EXHAUST SYSTEM
REMOUNTING THE
SHOCK ABSORBERS
• First, insert the top screws (Vs) with
the washers (R) and nuts (D).
• Insert the lower screws (Vi) and
relevant washers ( R).
V
i
56 11/07
D
45 ± 10%
D
D
2
30 ± 10%
R V
3
4
F. 139
R V
3
Vs
45 ± 15%
Vi
24 ± 15%
2
D
2
1
3
F
V
3
42 ± 15%
R
V
S
D
V
i
R
F. 142