Malaguti Centro 125 Service Manual page 52

125 i.e. - 160 i.e.
HANDLEBAR
• Remove beforehand:
- Front handlebar (page 27)
- Front shield (page 49).
- Brake pump (page 50).
- Right switch and left switch (M).
- Counterweights (P).
- Handlebars (N)
- Cut the cable and tube holding ties.
- Remove the throttle cable (A)
• Loosen the nuts and slide the pin off (H), taking care not to
damage the cables and tubes.
• Slide off the grips.
D
50 ± 20%
ELECTRIC FAN AND RADIATOR
Before any operations on the cooling system, check that
the fluid is below 50°C.
• Remove the front shield (page 49).
• Cut the cable and tube holding ties.
• Unscrew the radiator cap (A).
• Position the engine in a container suitable for collecting the
used coolant.
• Loosen the clamps (F) and slide the tube off (T) of the water
pump.
• Disconnect the tube (B).
D
F. 119
A
F. 120
51 11/07
P
N
L
M
A H D
B
F
F. 121
M
N
P
T