Malaguti Centro 125 Service Manual page 55

125 i.e. - 160 i.e.
FORK
NOTE - When removing the fork leg, as well
as the full fork, the following should be
removed beforehand:
- Front wheel (page 47)
- Front mudguard (page 49)
- Front brake calliper (page 48)
- Odometer transmission (page 48)
For the full fork, also remove the:
- Front shield (page 29)
- Handlebar (page 20)
• To check the oil level and to change oil,
see page 16).
FULL FORK
• Upper ring nut (A)
• Lower ring nut (A)
NOTE - When extracting the fork unit, take care with the bearings (S) spilling out.
• Remove grease the seat of the caps (C). Check the usage conditions and if necessary
replace them.
Grease and remount the fork unit.
Top bearings (Ø 3/16") n° 22
Lower bearings (Ø 1/4") n° 19
B
12 ± 10%
FORK LEG
• Loosen (V)
• Raise the fork leg a few
millimetres (A).
• Take out the elastic ring (B)
• Slide out the fork leg (A)
downwards.
V
30 ± 20%
A
140 ± 15%
54 11/07
V
B
A
F. 130
A
B
F. 131
A
B
S
C
S
C
F. 132