9-Slot Hot-Plug Basket
To remove the 9-slot hot-plug basket:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Open the top access panel. See "Top Access Panel" earlier in this chapter.
3. Remove all installed expansion boards in slots 1 through 9. See "Removing a PCI/PCI-X
Expansion Board" earlier in this chapter.
4. Flex the snap tab holding the array enabler board
Figure 2-40. Removing the array enabler board
1
Removal and Replacement Procedures 2-45
and remove the board
2
.