Life Fitness FIT SERIES MULTI PRESS Assembly Instructions Manual page 13

49
STEP 13:
• Route the MULTI PRESS CABLE (54) through the PRESS FRAME (8) and SECURELY assemble one 4-1/2" PULLEY (19) to the
PRESS FRAME (8) using four RH CAPS (53), one 3/8 X 67mm BOLT (39), one 3/8 X 61mm BOLT (38), four 3/8" SAE WASHERS
(50), four 3/8" RH WASHERS (51), two 3/8 X 1/2" FLANGE SPACERS (31) and two 3/8" LOW HEIGHT LOCK NUTS (49) as shown
in FIGURE 13.
• Route the MULTI PRESS CABLE (54) through the PRESS FRAME (8) and PIVOT ARM (5) and SECURELY assemble one 4-1/2"
PULLEY (19) to the PIVOT ARM (5) using one BLACK RH CAP (52), one RH CAP (53), one 3/8 X 70mm BOLT (40), two 3/8" SAE
WASHERS (50), two 3/8" RH WASHERS (51), one 2-7/8" X 2-1/4" CABLE CLIP (23), two 3/8 X 1/2" FLANGE SPACERS (31) and one
3/8" LOW HEIGHT LOCK NUT (49) as shown in FIGURE 13.
53
5
54
19
51
50
3/8 X 61mm 38
13
3/8 X 70mm 40
8
31
39 3/8 X 67mm
53
FIGURE 13
31
23
52 BLACK