Life Fitness FIT SERIES MULTI PRESS Assembly Instructions Manual page 11

FIGURE 11
53
49
STEP 11:
• Finish assembling the PRESS ARM ADJUST PLATE (10) to the PIVOT ARM (5) using two RH CAPS (53), two BLACK RH CAPS
(52), one 3/8 X 67mm BOLT (39), one 3/8 X 73mm BOLT (41), four 3/8" SAE WASHERS (50), four 3/8" RH WASHERS (51), one 3/8 X
3/4" FLANGE SPACER (32), one 3/8 X 1" FLANGE SPACER (33), one MULTI PRESS CABLE (54) and two 3/8" LOW HEIGHT
LOCK NUTS (49) as shown in FIGURE 11. (NOTE: Assemble the MULTI PRESS CABLE to the second set of holes.) (NOTE: When
finished assembling, SECURELY tighten all three bolts.)
• Insert one 5-1/2" TAPPED PIVOT SHAFT (28) into the PIVOT ARM (5).
32
10
54
11
5
28
33
3/8 X 73mm 41
51
50
52BLACK
39 3/8 X 67mm