Floppy Drive Interface - Ampro LittleBoard 735 Reference Manual

Table of Contents

Advertisement

Chapter 3
Table 3-3.
I/O Address Map (Continued)
0093-009F
00A0-00A1
00A2-00BF
00C0-00DF
00E0-00EF
00F0-00FF
01F0-01F7
0200-0240h
0240-0260h
0279h
02E8-02EF
02F8-02FF
0300-0340h
0340-0360h
0378-037F
03B0-03BB
03C0-03DF
03E8-03EF
03F0-03F5
03F6
03F7
03F8-03FF
04D0-04D1
0778-077F
0A79h
0CF8-0CFF
0CF9

Floppy Drive Interface

The SCH3114I-NU (U15) chip provides the floppy controller and supports one floppy drive. The floppy
signals are provided through a standard 34-pin header (J17). The floppy controller will support a 360k,
720k, 1.2M, 1.44M, or 2.88M drive.
The floppy drive header provides 34 pins, 2 rows, odd/even sequence (1, 2) with 0.100" (2.54mm) pitch.
24
System reserved
Slave Interrupt Controller
System reserved
Slave DMA Controller #2
System reserved
Math Coprocessor
IDE Hard Disk Controller
Mapped to ISA
Mapped to ISA
Mapped to ISA
Serial Port 4 (COM4)
Serial Port 2 (COM2)
Mapped to ISA
Mapped to ISA
Parallel Port (Standard and EPP)
Video (monochrome)
Video (VGA)
Serial Port 3 (COM3)
Floppy Disk Controller
IDE Hard Disk Controller
Floppy Disk Controller
Serial Port 1 (COM1)
Edge/Level Trigger PIC
Parallel Port (ECP Extensions) (Port 378+400)
Mapped to ISA
PCI Configuration Registers
Reset Control Register
Reference Manual
Hardware
LittleBoard 735

Advertisement

Table of Contents
loading

Table of Contents