Table of Contents
Advertisement
Chapter 4
BIOS Security Setup Screen
Main
Advanced
Security Settings
Supervisor Password :Not installed
User Password
Change Supervisor Password
Change User Password
v02.xx (C) Copyright 1985-20xx, American Megatrends, Inc.
•
Security Settings
Supervisor Password – [Not Installed]
♦
User Password – [Not Installed]
♦
Change Supervisor Password
♦
a. Select Change Supervisor Password from the Security Setup menu.
b.
Press <Enter> to access the pop-up entry field, Enter New Password.
c.
Type the password and press <Enter> again.
d.
The screen will not display the password as you type.
e.
Re-type the password when prompted by the pop-up entry field and press <Enter> again.
If the password is not confirmed when you re-type it, an error message will appear. The
password is stored in NVRAM if you have successfully entered the password.
Change User Password
♦
a.
Select Change User Password from the Security Setup menu.
b.
Press <Enter> to access the pop-up entry field, Enter New Password.
c.
Type the password and press <Enter> again.
d.
The screen will not display the password as you type.
e.
Re-type the password when prompted by the pop-up entry field and press <Enter> again.
If the password is not confirmed when you re-type it, an error message will appear. The
password is stored in NVRAM if you have successfully entered the password.
LittleBoard 735
BIOS Setup Utility
PCIPnP
Boot
:Not installed
Figure 4-5. BIOS Security Setup Screen
Reference Manual
Security
Chipset
Install or Change the
password.
Enter
F1
F10
ESC
BIOS Setup
Exit
Select Screen
Select Item
Change
General Help
Save and Exit
Exit
57
Advertisement
Table of Contents
