X12 speaker reassembly procedure
Pre-requisite
For safety reasons, always use the new screws and spare parts provided in the KR.
Procedure
1. Stick the four gaskets on the cabinet.
Use the inserts as a reference to position the gaskets.
2. Connect the speaker cables and position the speaker.
The LF speaker connectors are positioned downwards.
3. Secure the speaker with the provided 100222 screws and S100054 screws.
Use the 5 mm hex bit. Set the torque to 5 Nm.
33
Maintenance
X12 user manual (EN) version 2.1