Using SP-Y1 cables
— Connect SP cables (SP.7, SP5, SP10 or SP25) to the OUT1/OUT2 and OUT3/OUT4 speakON connectors of the
amplified controller.
— Use the CC4FP adapter of an SP-Y1 cable to split the signal into two channels, each feeding one enclosure.
— If necessary, use SP cables to connect identical enclosures in parallel with the first ones.
Refer to the cabling schemes below for more instructions.
X12
OUT1/OUT2
OUT3/OUT4
SB15m
OUT1/OUT2
OUT3/OUT4
23
SP
SP-Y1
CC4FP
SP
SP-Y1
CC4FP
SP
SP-Y1
CC4FP
SP-Y1
SP
CC4FP
Loudspeaker connection
SP
SP
SP
SP
SP
SP
SP
SP
X12 user manual (EN) version 2.1