Hitachi C 10FCD Instruction Manual And Safety Instructions page 15

Compound saw
Hide thumbs Also See for C 10FCD:
Table of Contents

Advertisement

Available languages

Available languages

1. S witch operation
Fig. 17
WARNING:
This will ensure that the power tool cannot be turned on accidentally or by someone
(especially a child) who is not qualified to use the power tool.
To prevent unauthorized operation of this tool, insert a padlock through the hole in
the switch trigger.
2. Using the vise asse m bly (Standard accessory)
Base
Fig. 18
Vise
Asse m bly
Support
Fence
5 m m
Cla m p Bolt
Fig. 19
CAUTION:
Always confirm that the motor head (see Fig. 1) does not contact the vise assembly
when it is lowered for cutting. If there is any danger that it may do so, loosen the 5
mm clamp bolt slightly and move the vise assembly to a position where it will not
contact the saw blade.
S witch
The switch lock is designed to prevent inadvertent operation of the
Lock
po w er tool.
To operate the po w er tool, it is necessary to first push up the switch
Hole
lock as sho w n in Fig. 17.
The trigger switch will not operate unless the switch lock has been
pushed up. W hen the trigger switch is released, the po w er goes off
Trigger
and the switch lock auto m atically returns to its initial position,
S witch
locking the trigger switch.
(1) The vise asse m bly can be m ounted on either the left side
Vise
Asse m bly
q Insert support of vise asse m bly into the hole located on
Support
w Then tighten 5 m m cla m p bolt as sho w n in Fig. 18.
NOTE:
(2) The vise asse m bly can be m ounted on either the left side
5 m m
Cla m p Bolt
q Insert support of vise asse m bly into the hole located on
w Then tighten 5 m m cla m p bolt as sho w n in Fig. 19.
base or the right side base, and can be raised or lo w ered
according to the height of the w orkpiece.
either the left side base or the right side base.
The support has two locking grooves into which
the tip of the 5 mm clamp bolt is designed to fit, to
lock the vise assembly in the desired position.
fence or the right side fence, and can be raised or lo wered
according to the height of the w orkpiece.
either the left side fence or the right side fence.
English
15

Advertisement

Table of Contents
loading

Table of Contents