Safety Definitions; General Safety; Power Tool Use And Care - Stanley PROSET PB3400 Instruction Manual

E N G L I S H
This instruction manual must be read by any person installing or operating this tool with particular
attention to the following safety rules.

1. SAFETY DEFINITIONS

The defi nitions below describe the level of severity for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock
Denotes risk of fi re
Improper operation or maintenance of this product could result in serious injury and property damage.
Read and understand all warnings and operating instructions before using this equipment. When using
power tools, basic safety precautions must always be followed to reduce the risk of personal injury.

1.1 GENERAL SAFETY

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fi re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Do not use outside the design intent of Placing STANLEY Engineered Fastening Blind Fasteners.
Use only parts, fasteners, and accessories recommended by the manufacturer.
Use Power Tool only with specifi cally designated battery packs.

1.2 POWER TOOL USE AND CARE

The tool must be maintained in a safe working condition at all times and examined at regular intervals for
damage and function by trained personnel. Any dismantling procedure will be undertaken only by trained
personnel. Do not dismantle this tool without prior reference to the maintenance instructions.
Do not modify the tool in any way. Any modifi cation to the tool is undertaken by the customer and will be the
customer's entire responsibility and void any applicable warranties.
Disconnect the battery from the tool before performing any maintenance, attempting to adjust, fi t or remove a
nose assembly.
Prior to use, check for misalignment or binding of moving parts, breakage of parts, and any other condition
that aff ects the tool's operation. If damaged, have the tool serviced before using. Remove any adjusting key or
wrench before use.
Prior to use, inspect battery for damage. Do not drop battery. A sharp impact may cause internal damage and
lead to premature battery failure.
5