Table of Contents
Advertisement
Settings/Supervisor level menu
Intensive water plus
You can choose whether you want
the Intensive and Water plus extra
options to be available for selection
in the Extras menu.
The machine is delivered with this
setting deactivated (deselected).
Water plus
This setting is used to select the
water intake setting for the Water plus
extra option.
You have 3 options:
Water plus
The water level is increased in the wash
and rinse stages of the Cottons
hygiene, Cottons universal, Minimum
iron, Silks and Table linen programmes
(default setting).
Extra rinse
An extra rinse is introduced in the
Cottons hygiene, Cottons universal and
Minimum iron programmes.
Water plus and Extra rinse
The water level is increased in the wash
and rinse stages of the Cottons
hygiene, Cottons universal, Minimum
iron, Silks and Table linen programmes
and an extra rinse is also introduced in
the Cottons hygiene, Cottons universal
and Minimum iron programmes.
40
Save
You can choose whether you want
the Save option to appear in the main
menu. The save function is required
if, for example, you want to change
the favourite wash programmes
which have been saved to the short
cut buttons.
The machine is delivered with this
option deactivated.
Auto load control
The machine has auto load control.
The water level and the programme
durations are adjusted in some
programmes according to the load. If
the auto load control is deactivated,
the machine will always carry out the
programme sequence based on a full
load.
The machine is delivered with this
option activated.
Pre-wash water
You can select hot or cold water for
the pre-wash. Hot water can only be
only taken in if the wash temperature
is above 30°C.
This setting is confirmed when the
machine is commissioned.
Advertisement
Table of Contents
