Miele PW 6080 Vario LP Commissioning Instructions page 10

Commissioning the machine
10
1 Cottons Uni.
2 Minimum iron
3 Delicates
4 Woollens H
To finish the commissioning process completely, a first wash
programme must be started.
If the power to the machine is switched off before the first
wash programme is started (e.g. by pressing the K
button), the commissioning process can be carried out
again. Once a wash programme that is longer than 20
minutes has been run, it is not possible to carry out the
commissioning process again.
– 2. Start the first wash programme
For safety reasons, spinning is not possible until the first
wash programme has been run. To activate the spinning
function and to complete the commissioning process, you
must run a wash programme without laundry and without
detergent.
^ Open the stopcocks.
^ Select Cottons 60°C and confirm your selection.
The main menu for Cottons Universal will then appear.
^ Press the flashing Start button.
After this programme has finished, the washer-extractor is
ready for processing laundry.
60°C Programme selection...
40°C Settings F...
40°C
15:00
30°C