Miele PW 6080 Vario LP Commissioning Instructions page 7

Each of these settings must now be
confirmed (and altered if required).
More details about the settings are
given at the end of this booklet.
Place a cross in the box
indicate your selection, or fill in the
gaps _____ as required.
Pre-wash water
This setting establishes the temperature
of the water for the pre-wash.
^ Select either:
Cold
8
The washer-extractor is only
connected to a cold water supply. Or
Hot
8
The washer-extractor is connected to
hot and cold water supplies.
Main wash water
This setting establishes the temperature
of the water for the main wash.
^ Select either:
Cold
8
The washer-extractor is only
connected to a cold water supply. Or
Hot
8
The washer-extractor is connected to
hot and cold water supplies.
Commissioning the machine
to
8
See the paragraph "Water
connection" in the "Installation and
connection" section of the Operating
and installation instructions.
Set contrast
The contrast for the display can be set
in 10 steps.
^ Select the contrast for the display.
Step _____ (1 to 10)
Set brightness
The brightness for the display can be
set in 10 steps.
^ Select the brightness for the display.
Step _____ (1 to 10)
Payment system
Setting for coin-operated machines.
^ Select the option you require.
No coin box
8
The Coin mechanism lock setting for
operating the machine with a coin
box is skipped.
Programme operation
8
The machine is operated using a
coin box.
Timed operation
8
The machine is coin-operated using
a time meter.
7