Discover Se3 Console Overview - LifeFitness DISCOVER SE3 Operation Manual

DISCOVER SE3 CONSOLE OVERVIEW

Treadmill shown
1. Touch Screen Display

Use to select, set up, monitor and save workouts.

Access entertainment options.
2. Optional RFID (Radio Frequency Identifi cation)
Fitness facility owners can order this option for their
users allowing them to swipe their facility identifi ca-
tion card on the console. The console's hardware is
compatible with the two main frequencies (125kHz
and 13.56Mhz) used for RFID cards.
3. Reading Rack / Tablet Holder
Place traditional reading material as well as mobile
devices and tablets in this built-in holder.
4. USB
Charge USB devices.
5. Headphones
Plug in headphones to listen to TV and entertainment
options.
14
6. Activity Zone
This external device places the most frequently used
controls at a user's fi ngertips:
a. Incline
Press these keys to increase or decrease the incline of
the treadmill.
b. Speed
Press these keys to increase or decrease the speed of
the striding belt.
c. Stop
Press to stop the striding belt.
d. Go
Press to automatically begin a Quick Start Workout.
e. Walk, Jog, Run
Press to immediately change the belt speed to preset
Walk, Jog, Run values.
f. Emergency Stop Magnet
This magnet serves as a safety feature by stopping
the belt should the user stumble or fall.

Before starting a workout, attach the clip, located
on the cord of the magnet, to a piece of clothing.

To stop the striding belt on the treadmill, pull the
cord, removing the magnet from the console.

Replace the magnet to reset the system.