Table of Contents
Advertisement
Instruction Manual
INSTALLING THE DOOR
1. Glue the velcro to the pannel.
2. Attach the pannel to the plate.
3. Install the door using C.A glue.
C.A glue
Pilots
67
Glue the velcro
68
69
70
4. Screw the door.
BALANCING
1. It is critical that your airplane be balanced
correctly. Improper balance will cause your
plane to lose control and crash.
THE CENTER OF GRAVITY IS LOCATED 85mm
BACK FROM THE LEADING EDGE OF THE
WING, AT THE FUSELAGE.
2. Mount the wing to the fuselage. Using a couple
of pieces of masking tape, place them on the
top side of the wing 85mm back from the
leading edge, at the fuselage sides.
3. Turn the airplane upside down. Place your
fingers on the masking tape and carefully lift
the plane .
4. If the nose of the plane falls, the plane is heavy
nose. To correct this first move the battery pack
further back in the fuselage. If this is not
possible or does not correct it, stick small
amounts of lead weight on the fuselage under
the horizontal stabilizer. If the tail of the plane
falls, the plane is tail heavy. To correct this,
move the battery and receiver forward or if this
is not possible, stick weight into the firewall.
When balanced correctly, the airplane should
sit level or slightly nose down when you lift it up
with your fingers.
5.
We flew this model with OS 120 AX and the
weight for take off is 5,8 kg.
15
CESSNA 182
Screw
85mm
71
Advertisement
Table of Contents
