Installing The Motor And Battery - Pheonix Model Cessna 182 Instruction Manual

Instruction Manual
Installing the engine
Locate the long piece of wire used for the throttle
pushrod. One end of the wire has been
pre-bend in to a "Z" bend at the factory. This
"Z" bend should be inserted into the throttle
arm of the engine when the engine is fitted onto
the engine mount. Fit the engine to the engine
mount using the screws provided.
Install with OS 120 two stroke
145mm
Install with OS 22cc Engine
145mm

INSTALLING THE MOTOR AND BATTERY

Installing the electric motor
This model can fly with electric, here is our
recommended for set up the system.
- Motor: RIMFIRE .120 (not included)
- Lipo cell: 5-6 cells / 5500 – 6000mAh (not included)
- Esc: 80-100A (not included)
35mm
15mm
80mm
34
35
8
CESSNA 182
50mm
Screw
36
37
38
39