Hitron CGNVM User's Guide
1.8
Resetting the CGNVM
When you reset the CGNVM to its factory defaults, all user-configured settings are
lost, and the CGNVM is returned to its initial configuration state.
To reset the CGNVM, click Admin > Device Reset. In the screen that displays, click
the Factory Reset button.
The CGNVM turns off and on again, using its factory default settings.
NOTE:
Depending on your CGNVM's previous configuration, you may need to re-
configure your computer's IP settings; see
IP Address Setup
on page 23.
28
28
Version 1.0, 02/2015. Copyright
2012 Hitron Technologies
Version 1.0, 02/2015. Copyright
2014 Hitron Technologies
INTRODUCTION