Figure 45: The Security: Service Filter Add/Edit Screen - Hitron CGNVM User Manual

NOTE: Ensure that Enabled is selected in the Security > Service Filter screen in
order to add or edit service filtering rules.
The following screen displays.
Figure 45: The Security: Service Filter Add/Edit Screen
The following table describes the labels in this screen.
Table 36: The Security: Service Filter Add/Edit Screen
Application Name
Protocol
Port Range
108 108 Version 1.0, 02/2015. Copyright
Version 1.0, 02/2015. Copyright
Hitron CGNVM User's Guide
Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Use this field to specify whether the CGNVM should filter
via:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
NOTE: If in doubt, leave this field at its default (TCP).
Use these fields to specify the start and end port for
which this filtering rule applies. These are the ports to
which traffic will be blocked.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
2012 Hitron Technologies
2014 Hitron Technologies
SECURITY