Hitron CGNVM User Manual page 123

5
If the above steps do not work, you need to reset the CGNVM. See
CGNVM on page 28. All user-configured data is lost, and the CGNVM is
returned to its default settings. If you previously backed-up a more recent
version your CGNVM's settings, you can now upload them to the CGNVM; see
The Admin: Backup Screen
6
If the problem persists, contact your vendor.
Problem: I Cannot Connect My Wireless Device
1
Ensure that your wireless client device is functioning properly, and is configured
correctly. See the wireless client's documentation if unsure.
2
Ensure that the wireless client is within the CGNVM's radio coverage area. Bear
in mind that physical obstructions (walls, floors, trees, etc.) and electrical
interference (other radio transmitters, microwave ovens, etc) reduce your
CGNVM's signal quality and coverage area.
3
Ensure that the CGNVM and the wireless client are set to use the same wireless
mode, SSID and security settings (see
page 78).
4
Re-enter any security credentials (WEP keys, WPA(2)-PSK password, or WPS
PIN).
5
If you are using WPS's PBC (push-button configuration) feature, ensure that you
are pressing the button on the CGNVM and the button on the wireless client
within 2 minutes of one another.
123 123 Version 1.0, 02/2015. Copyright
Version 1.0, 02/2015. Copyright
Hitron CGNVM User's Guide
on page 98.
The Wireless: Basic Settings Screen
2012 Hitron Technologies
2014 Hitron Technologies
Resetting the
on
TROUBLESHOOTING