The Wireless: Basic Settings: Wps Screen - Hitron CGNVM User Manual

Table 24: The Wireless: Basic Settings: 5G Screen (continued)
Encrypt Mode
Passphrase
Save Changes
Cancel
Help
4.2.3

The Wireless: Basic Settings: WPS Screen

Use the WPS screen to enable WPS-capable wireless clients to connect to the
CGNVM via a simple push-button, or by entering a password. See
Basic Settings: WPS Screen
Click Wireless > Basic Settings > WPS. The following screen displays.
88 88 Version 1.0, 02/2015. Copyright
Version 1.0, 02/2015. Copyright
Hitron CGNVM User's Guide
Select the mode of encryption you want to use on the
5GHz network. The options that display depend on the
options you selected in the other fields in this screen.
WEP:
Select WEP64 to use a ten-digit security key.
Select WEP128 to use a twenty-six-digit security
key.
WPA-PSK, WPA2-PSK and Auto:
Select TKIP to use the Temporal Key Integrity
Protocol.
Select AES to use the Advanced Encryption
Standard.
Select TKIP/AES to allow clients using either
encryption type to connect to the CGNVM.
NOTE: Use of the TKIP encryption standard limits the
wireless network speed to 54Mbps (802.11a
speed).
Enter the security key or password that you want to use
for the 5GHz wireless network. You will need to enter
this key into your wireless clients in order to allow them
to connect to the network.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
on page 88.
The Wireless:
2012 Hitron Technologies
2014 Hitron Technologies
WIRELESS