Table of Contents
Advertisement
Hitron CODA-4x8x User's Guide
1.7
Resetting the CODA-4x8x
When you reset the CODA-4x8x to its factory defaults, all user-configured settings
are lost, and the CODA-4x8x is returned to its initial configuration state.
To reset the CODA-4x8x, press and hold the RESET button for ten seconds, or go to
the Admin > Device Reset screen and click Factory Reset (see
The Admin: Device
Reset Screen
on page 115). The CODA-4x8x turns off and on again, using its factory
default settings.
NOTE:
Depending on your CODA-4x8x's previous configuration, you may need to
re-configure your computer's IP settings; see
IP Address Setup
on page 21.
25
25
Version 1.0, 11/2016. Copyright
2012 Hitron Technologies
Version 1.0, 11/2016. Copyright
2016 Hitron Technologies
Advertisement
Table of Contents
