Hitron CGNVM User Manual page 122

Docsis 3.0 emta wifi gateway
Table of Contents

Advertisement

5
If none of the above steps solve the problem, consult your vendor.
Problem:
One of the LEDs does not Display as Expected
1
Ensure that you understand the LED's normal behavior (see
2
Ensure that the CGNVM's hardware is connected correctly; see the Quick
Installation Guide.
3
Disconnect and re-connect the power cable to the CGNVM.
4
If none of the above steps solve the problem, consult your vendor.
Problem:
I Forgot the CGNVM's IP Address
1
The CGNVM's default LAN IP address is 192.168.0.1.
2
Depending on your operating system and your network, you may be able to find
the CGNVM's IP address by looking up your computer's default gateway. To do
this on (most) Windows machines, click Start > Run, enter "cmd", and then
enter "ipconfig". Get the IP address of the Default Gateway, and enter it in your
browser's address bar.
Problem:
I Forgot the CGNVM's Admin Username or Password
The default username is admin, and the default password is admin.
Problem:
I Cannot Access the CGNVM or the Internet
1
Ensure that you are using the correct IP address for the CGNVM.
2
Check your network's hardware connections, and that the CGNVM's LEDs
display correctly (see
3
Make sure that your computer is on the same subnet as the CGNVM; see
Address Setup
on page 23.
4
If you are attempting to connect over the wireless network, there may be a
problem with the wireless connection. Connect via a LAN port instead.
122
122
Version 1.0, 02/2015. Copyright
Version 1.0, 02/2015. Copyright
Hitron CGNVM User's Guide
LEDs
on page 20).
LEDs
on page 20).
2012 Hitron Technologies
2014 Hitron Technologies
TROUBLESHOOTING
IP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents