Table of Contents
Advertisement
SBI-7128R-C6 Blade Module User's Manual
Table 4-5. Main Components of a SBI-7128R-C6 Blade Module
Item
Description
1
Blade Unit/Module
2
2.5" Hot-swap HDD/SSD/NVMe Hard Drives
3
DIMMs (system memory)
4
CPUs (2)
5
Top Cover
6
LSI RAID Card
7
Add-on Module
8
Super CAP
Memory Support
The SBI-7128R-C6 blade module supports up to 512 GB of 32 GB, 16 GB, 8 GB and 4
GB RDIMM or 1 TB of 64 GB and 32 GB LRDIMM, 2133/1866/1600 MHz speed
SDRAM memory in sixteen (16) 288-pin DDR4 DIMM sockets. See
Memory Installation on page 3-9
Hard Disk Drives
The SBI-7128R-C6 blade unit accommodates up to six 2.5" Hot-swap HDD/SSD/NVMe
SATA hard disk drives, which are mounted in drive "trays". The drives can be
hot-swapped and removed or replaced without powering down the blade unit they reside
in. The six drives can be used to set up a RAID 0, 1 and 5 array. These drives use a
yellow color for the Blade HDD active LED. See
page 5-1
for further details on RAID Setup.
WARNING: To maintain proper airflow, both hard drive bays must have drive carriers
inserted during operation whether or not a drive is installed in the tray.
for further details on mainboard memory installation.
Chapter 5: "RAID Setup Procedure" on
4-8
Section 3-5:
Advertisement
Table of Contents
