Wachendorff ur3274 User Manual page 48

46 Tune
tune
tuning type selection
Disabled > Default
dis.
Automatic. PID parameters are calculated at each
auto
activation and/or change of setpoint.
Manual. Launch by keyboard or by digital input.
man.
47 Setpoint Deviation Tune
s.d.tu.
select the deviation from the command setpoint as
threshold used by Autotuning to calculate PID parameters.
0-5000 [digit
Default: 10.
48 Operatine Mode
op.mo.
select operating mode
Controller > Default
cont.
Programmed Cycle
pr.cY.
2 Thresholds Switch
2t.s.
2 Thresholds Switch Impulsive
2t.s. i .
3 Thresholds Switch Impulsive
3t.s. i .
4 Thresholds Switch Impulsive
4t.s. i .
49 Automatic/Manual
au.ma.
enable automatic/manual selection.
Disabled > Default
dis.
Enabled
en.
Enabled Stored
en.st.
50 Digital Input
dGt. i .
Digital input functioning.
Par. 48 selection must be
Disabled > Default
dis.
Start/Stop
st.st.
Run n.o.
rn.n.o.
48
UR3274U - User manual
], (degrees.tenths for temperature sensors) >
7
cont.
or
Pr.cy.