Wachendorff ur3274 User Manual page 44

30 Alarm 1 Setpoint Protection
a. 1 .s.p.
does not allow the user to modify setpoint.
> Default
Free
Locked
Lock.
Locked and hidden
Hide
31 Alarm 2
aL. 2
Alarm 2 selection. Alarm intervention is associated to AL2.
Disabled > Default
dis.
Absolute Alarm
a. aL.
Band Alarm
b. aL.
High Deviation Alarm
H.d.aL.
Low Deviation Alarm
L.d.aL.
Absolute Command setpoint Alarm
a.c.aL.
Start Alarm, Attivo in Run
st.aL.
Cooling
CooL
Timer 1 Start Alarm
t. 1 .s.a.
Timer 1 End Alarm
t. 1 .e.a.
Timer 1 Warning Expiring
t. 1 .w.e.
Timer 2 Start Alarm
t.2.s.a.
Timer 2 End Alarm
t.2.e.a.
Timer 2 Warning Expiring
t.2.w.e.
Timer 1-2 Start Alarm
t. 1 .2.s.
Timer 1-2 End Alarm
t. 1 .2.e.
Timer 1-2 Warning Expiring
t. 1 .2.w.
32 Alarm 2 State Output
a.2.s.o.
alarm 2 output contact and intervention type.
(n.o. start) Normally open, active at start. > Default
n.o.s.
(n.c. start) Normally closed, active at start.
n.c.s.
(n.o. threshold) Normally open, active on reaching alarm
n.o.t.
(n.c. threshold) Normally closed, active on reaching alarm
n.c.t.
6
On activation the output is inhibited if the controller is in alarm mode.
Activates only if alarm condition reappers, after that it was restored.
44
UR3274U - User manual
6
6