Native Instruments MASCHINE STUDIO Manual page 908

Press SHIFT + ARP
►
ters.
The displays below Knobs 1–8 switch to the Arp parameters. When you release SHIFT,
→
the PAGE field in the leftmost display reads ARP. Note that the
keeps indicating the selected Plug-in in the focused Sound slot (the Sampler in the pic-
ture below):
As long as you hold SHIFT, the leftmost display shows instead the index letter and num-
ber of the focused Sound slot
more information, see section
Group.
When your keyboard is connected to a MASCHINE instance, Arp Edit mode shows the same
Knob layout and section names as on the MASCHINE STUDIO or MASCHINE (MK2) controller
except for the Preset selection (Knob 1), which is included in the
Element
MAIN Section
Knob 1
Knob 2
RHYTHM Section
Knob 3
Knob 4
to switch Knobs 1–8 to Arp Edit mode and access the Arp parame-
(PAGE field) along with its name
↑15.3, Navigating and Controlling Your Sounds within a
Description
Selects between the four available presets, labeled
presets are the same as on MASCHINE controllers.
Selects the Type of arpeggio. This parameter is shared with
MASCHINE controllers.
Adjusts the Rate of the arpeggio. This parameter is shared with
MASCHINE controllers.
Selects the Unit of the arpeggio. This parameter is shared with
MASCHINE controllers.
KOMPLETE KONTROL Integration
Using the Perform Features
PRESET field underneath
(PRESET field). For
MAIN section:
PRESET 1–4. The
MASCHINE STUDIO - Manual - 908