Native Instruments MASCHINE STUDIO Manual page 827

The following parameters are available:
Parameter
STRETCH section
TUNE
FORMANT C
(Formant Correction)
MODE
AUTO DTCT (Auto
Detection, Beat
mode only)
SRC BPM (Source
BPM, Beat mode
only)
NEW BPM
(Beat Mode only)
Description
Adjusts the detuning (pitch shifting) to be applied (in semitones and
cents). Leave this value to
Enables/disables the formant correction. Formant correction allows the
pitch-shifted audio to retain the timbre (or "color") of the original
audio as much as possible. This is especially useful for melodic
instruments.
Selects between Beat and
In Beat mode, the new tempo is defined relative to the time signature
(the beats and bars) of the original audio. This can be useful if you
sampled a loop with a clearly defined rhythm (e.g., a drum loop).
In Free mode, the new tempo is defined independently from the time
signature of the source. This is more suited for non-rhythmic Samples.
In this mode only one parameter is available:
If enabled, MASCHINE automatically detects the tempo of the original
audio.
Allows to define the tempo of the original audio (in BPM). This tempo
is defined in different ways according to the
If AUTO DTCT is enabled, you can set the length (in bars) of the
original audio. You can choose between 1/2, 1, and 2 bars. The
number between brackets indicates the resulting tempo (in BPM)
derived from the number of bars you have set and the computed
tempo value.
If AUTO DTCT is disabled, you can directly define the tempo of the
original audio (in BPM).
Defines the target tempo of the time-shifted audio (in BPM).
0.00 to leave the original pitch untouched.
Free mode:
SPEED
AUTO DTCT
MASCHINE STUDIO - Manual - 827
Sampling and Sample Mapping
Editing a Sample
(see below).
value: