Native Instruments Maschine Manual page 641

Mouse/Keyboard Action
Hold [Ctrl] ([Cmd] on Mac OS X) and
click several Zones
Hold [Shift] and click two Zones
Click and drag a selection frame in
the Sample Map
Press [Ctrl]+[A] ([Cmd]+[A] on Mac
OS X)
Edit Commands
Drag the left/right border of a Zone
Drag the higher/lower border of a
Zone
Drag a corner of a Zone
Click inside a Zone and drag
Double-click a Zone
Right-click ([Cmd]-click on Mac
OS X) a Zone
Press [Del] or [Backspace]
You can also adjust the key and velocity ranges in the Zone settings at the bottom of the
Zone page. See ↑13.5.6, Adjusting the Zone Settings
Command
Selects all clicked Zones. Click a selected Zone to
deselect it (i.e. remove it from the selection).
Selects both Zones and all Zones in-between.
Selects all Zones within or overlapping the frame.
Selects/deselects all Zones. When deselecting, only
the focused Zone remains selected.
Adjusts the key range for the selected Zones.
Adjusts the velocity range for the selected Zones.
Simultaneously adjusts the lowest/highest note and
the lowest/highest velocity of the selected Zone(s) —
depending on the corner.
Moves the selected Zone(s) across the Sample Map.
Note that the Root Key of each Zone is moved
accordingly.
Extends the key and velocity ranges of the Zone so
that it fits the key and velocity limits of the neighbor
Zones. This can be very useful to quickly fill up any
key or velocity gap between Zones.
Opens the Sample Map menu (see below).
Removes the selected Zone(s) from the Sample Map.
for a detailed description.
Sampling and Sample Mapping
Mapping Samples to Zones
MASCHINE 2 - Manual - 641