Native Kontrol Standard - Native Instruments Maschine Manual

You can select the desired controller from the
from the Controller submenu in the MASCHINE menu:
Click the Controller menu (left) or the Controller submenu in the MASCHINE menu (right) and select the controller you want
to use (Windows depicted).
Hardware
On the controller you want to use with the MASCHINE software, do the following:
▪ MASCHINE STUDIO controller: Press
desired instance, and press the jog wheel or Button 8 to load it.
▪ MASCHINE (MK2) controller: Press
select the desired instance, and press Button 8 to load it.
▪ MASCHINE MIKRO (MK2) controller: Press
the desired instance, and press the Control encoder to load it.
2.4

Native Kontrol Standard

Native Kontrol Standard (NKS) is a software instrument format that allows third-party develop-
ers to integrate with MASCHINE and KOMPLETE KONTROL hardware and software at the
same deep level as KOMPLETE Instruments.
The Native Kontrol Standard includes:
Controller menu in the Application Menu Bar or
SHIFT + PLUG-IN, turn the jog wheel to select the
SHIFT + STEP, turn Knob 5 (or press Button 5/6) to
SHIFT + F2, turn the Control encoder to select
Basic Concepts
Native Kontrol Standard
MASCHINE 2 - Manual - 42