Table of Contents
Advertisement
Network Camera·Quick Operation Guide
Note:
You can click
to order the information; you can click
device table and hide the network parameter panel on the
right side, or click
panel.
Modify device information
Steps:
1). Select the device to be modified in the device list as shown
in Figure 3-3. The network parameters of the device will be
displayed in the Modify Network Parameters panel on the
right side as shown in Figure 3-4.
2). Edit the modifiable network parameters, e.g. IP address
and port number.
3). Enter the password of the admin account of the device in
the Password field and click
changes.
or
on each column heading
to show the network parameter
19
to show the
to save the
Advertisement
Table of Contents
