Modify Device Information - HIKVISION DS-2CD2712F-I Quick Operation Manual

Network Dome Camera· Quick Operation Guide
You can click
the information; you can click
and hide the network parameter panel on the right side, or
click
 Modify device information
Steps:
Select the device to be modified in the device list as shown
1).
in Figure 3-3. The network parameters of the device will be
displayed in the Modify Network Parameters panel on the
right side as shown in Figure 3-4.
Edit the modifiable network parameters, e.g. IP address and
2).
port number.
Enter the password of the admin account of the device in
3).
the Password field and click Save to save the changes.
or
to show the network parameter panel.
Figure 3-3 Select a Device
on each column heading to order
to show the device table
29