Installation - Electrolux EKI6450AO User Manual

comes on
and number come on
come on
If you cannot find a solution to the prob-
lem yourself, contact your dealer or the
service centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

13. INSTALLATION

WARNING!
Refer to the Safety chapters.
Height
Width
Depth
Oven capacity
Voltage
Problem
Dimensions
847 - 867 mm
596 mm
600 mm
74 l
230 V
Possible cause
The diameter of the bot-
tom of the cookware is
too small for the cooking
zone
There is an error in the
appliance
There is an error in the
appliance, because a
cookware boils dry or you
use not correct cook-
ware. Overheating pro-
tection for the cooking
zone operates. The auto-
matic switch-off operates
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the oven cavity.
Frequency
13.1 Location of the appliance
You can install your freestanding appli-
ance with cabinets on one or two sides
and in the corner.
Remedy
Move cookware to a
smaller cooking zone
Disconnect the appliance
from the electrical supply
for some time. Discon-
nect the fuse from the
electrical system of the
house. Connect again. If
comes on again,
speak to the After Sales
Service
Switch off the appliance.
Remove the hot cook-
ware. After approximately
30 seconds switch on the
cooking zone again.
should disappear, residu-
al heat indicator can stay.
Cool down the cookware
and check it with the sec-
tion Cookware for the in-
duction cooking zone
.........................................
.........................................
.........................................
ENGLISH 33
50 Hz