Regulatory Notices And Safety Information - Blackmagicdesign HyperDeck Installation And Operation Manual

Regulatory Notices and Safety Information

Regulatory Notices
Disposal of waste of electrical and electronic equipment within the European union.
The symbol on the product indicates that this equipment must not be disposed of with
other waste materials. In order to dispose of your waste equipment, it must be handed
over to a designated collection point for recycling. The separate collection and
recycling of your waste equipment at the time of disposal will help conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city recycling office or the dealer
from whom you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and , if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. Operation of this product in a
residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at personal expense.
Operation is subject to the following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may
cause undesired operation.
Connection to HDMI interfaces must be made with shielded HDMI cables.
Safety Information
This equipment must be connected to a mains socket outlet with a protective earth
connection.
To reduce the risk of electric shock, do not expose this equipment to dripping or
splashing.
This equipment is suitable for use in tropical locations with an ambient temperature of
up to 40ºC.
Ensure that adequate ventilation is provided around the product and is not restricted.
When rack mounting, ensure the ventilation is not restricted by adjacent equipment.
No operator serviceable parts inside. Refer servicing to your local Blackmagic Design
service centre.
Use only at altitudes not more than 2000m above sea level.
Warnings for Authorized Service Personnel
Disconnect power from both power inlets before servicing!
Caution- Double Pole/ Neutral Fusing
The power supply contained in this equipment has a fuse in both line and neutral
conductors and is suitable for connection to the IT power distribution system in Norway.
Regulatory Notices and Safety Information 55