Environmental Specifications - Dell DL1300 Owner's Manual

Table of Contents

Advertisement

Environmental specifications

NOTE: For additional information about environmental measurements for specific system
configurations, see Dell.com/environmental_datasheets.
Table 11. Temperature specifications
Temperature
Storage
Continuous operation (for altitude less than 950 m
or 3117 ft)
For information about fresh air, see Expanded
Operating Temperature section.
Maximum temperature gradient (operating and
storage)
Table 12. Relative humidity specifications
Relative humidity
Storage
Operating
Table 13. Maximum vibration specifications
Maximum vibration
Operating
Storage
Table 14. Maximum shock specifications
Maximum shock
Operating
Storage
Specifications
–40°C to 65°C (–40°F to 149°F)
10°C to 35°C (50°F to 95°F) with no direct sunlight
on the equipment.
20°C/h (36°F/h)
Specifications
5% to 95% RH with 33°C (91°F) maximum dew
point. Atmosphere must be non-condensing at all
times.
10% to 80% relative humidity with 29°C (84.2°F)
maximum dew point.
Specifications
0.26 G
at 5 Hz to 350 Hz (all operation
rms
orientations).
1.88 G
at 10 Hz to 500 Hz for 15 min (all six
rms
sides tested).
Specifications
Six consecutively executed shock pulses in the
positive and negative x, y, and z axes of 40 G for up
to 2.3 ms.
Six consecutively executed shock pulses in the
positive and negative x, y, and z axes (one pulse on
each side of the system) of 71 G for up to 2 ms.
21

Advertisement

Table of Contents
loading

Table of Contents